?PTFE
Fluoropolymers known as high functional resins have been making great contributions to industry. Polytetrafluoroethylene(PTFE) occupies 60-70% of the total demand for fluoropolymers. Although PTFE was discovered more than 60 years ago,because it has a wide service temperature range, high chemical resistance,high insulation,low friction,non-stick,long life and nonflammability,its application is being explored in new field.

Characteristics of Fluon PTFE

IUPAC Name Polytetrafluoroethylene CAS 9002-84-0
High Thermal Stability Usable over a wide tmperature range (-180?C-260?C)
Nonflammability Oxygen Index >95, V-0(UL-94 Method)
High Chemical Resistance Inert to almost all chemicals
Good Solvent Resistance Not affected by any solvent
Electrical Properties Low dielectric constant over a wide frequency range,and high insulating by any property.
Low Friction Minimum friction coefficient
Non-stick Highly non-stick and good mould release property
Long Life Not affected by outdoor use

 

Contents
  • Typical properties of Fluon PTFE
    •
  • Granular Polymers (Moulding Powders :G grade)
    •
  • Coagulated Dispersion Polymers (Fine Powders :CD grade)
    •
  • Aqueous Dispersions (AD grade)
    •
  • Lubricant Polymers (L grade)
    •
  • Filled Compounds (FC grade)
    •

    *Information in this publication is based on our general experience and given in good faith, but because of the many particular factors which are outside our knowledge and control and affect the use of products, no warranty is given or to be implied with respect to such information.


    Produced by     Asahi Glass Fluoropolymers Co.,LTD.

    Asahi Glass Fluoropolymers Co.,LTD. was originated as a joint company of ICI of UK and Asahi Glass of Japan to produce PTFE in November 1981 and have been established as a affiliated company of 100% Asahi Glass since January 1999.

    Before use of this product, we urge the Careful reading of the appropriate Material Safety Data Sheet (MSDS). Technical information brochures are available for some products. For the safe use of the product, one must abide by the use method and the purposes described in the relevant brochure and MSDS. Please note that the brochure and MSDS are based on the latest information and data available, but additional and/or Corrections may be made, from time to time, without notice when new data becomes available and/or regulations are Changed. Feel free to contact us directly and/or the selling agency if you have any questions.

    We have subsidary companies to produce PTFE also in USA and UK.
    Link to     Asahi GlassFluoropolymers